Spotting is a skill.

Good spotting will eliminate almost all of the falling hazards when bouldering, freeing the climber to focus on the climb.

This article examines some of the difficulties at hand as well as possible solutions.

Read further to understand how to spot while bouldering inside or outside.

How to Spot while Bouldering
How to Spot while Bouldering? (Bouldering Lingo and Tips)

It is not enough to learn the climbing techniques when bouldering.

You can learn how to spot when bouldering to enhance safety.

A spotter is the protector of the climber’s life when he is bouldering.

Information about the bouldering lingo and climbing holds can help you communicate with the climber when in the spotting position.

Bouldering Lingo You Should Know

You will feel less alienated in the gym if you communicate with the climber in bouldering terms.

It is possible to speed up your learning of how to spot when bouldering by learning specific terms.

Expert climbers will feel safe when they are in the spotting position.

  • Grade. The grade is the level of difficulty of a bouldering wall. You should not use the climbing wall grading terms for the bouldering walls. You can tell the climber that he is entering the V4 level of the wall to ensure he understands his chances of falling.
  • Crag. It is the term climbers use to describe the climbing area. They can say that crag in this gym is excellent. Some may say that they had a hard time in the crag today.
  • Deadpoint. You can slow your movement to ensure you grab the next difficult hold on the bouldering wall. People may say that Deadpoint is the only way to get to this hold.
  • Problem. Climbers use the word problem to tell about the climbing route. They will not say this climbing route is hard. This problem is the hardest in our gym is the right way to explain it.
  • Crux. The most challenging part of the climbing wall is known as the crux.
  • Project. A climbing route or climbing wall a person is trying to climb at a specific time.
  • Mantel. It is an act of pulling the lip and pressing your arm to go to the top of the hard-to-climb boulder.
  • Send. It is the act of completing the climbing problem in the specified time.
  • Dyno. It is a movement that forces you to grab the next hold by keeping the hands and legs in the air simultaneously.
  • Beta. The best way to climb a bouldering wall.
  • Pumped. It is the phenomenon of an increase in the hardness of your hands due to lactic acid build-up.

What Are the Types of Rock Climbing Holds?

You can climb the bouldering walls quickly when you know about different types of holds.

You can climb the wall faster as you know which holds are more suitable for climbing.

  • Flake. It is a part of the rock that you can place your hand or feet into it. It forms due to the breaking of a small rock part.
  • Bucket. You can wrap your finger around this rock due to its large size.
  • Undercling. You can pull this hold due to the clinging bottom.
  • Hueco. It is a rock in a round shape and difficult to hold.
  • Pocket. It is a hold that you can fit only one finger due to its smaller size.
  • Sloper. You can only hold the sloper with the open hand as the palm has to grip it.
  • Pinch. It is easy to understand this hold by name as you can hold it with your finger and thumb pinching action.
  • Crimp. One of the smallest holds on the climbing wall.

Proper Spotting Technique when Bouldering

  • Be ready for your boulderer to fall, virtually on you, if you’re going to spot it effectively. It would be best if you made an effort, which entails paying close attention at all times.
  • To make both the climber and the spotter more comfortable, identify pad motions and potential problems before the boulderer takes the first step. Inquire about possible cruxes and make predictions about where your boulderer could land. Spotters are also there for support and guidance, and having a bunch of people cheering you on will frequently help you stay in the game longer.
  • One of the most important jobs of a spotter is to properly set up the pads and adjust them between tries to avoid the common but easily avoidable lower-leg and ankle injuries that occur when boulderers land in the right zone but on an irregular surface or space in the pads. Because pads move after each fall, both the climber and the spotter should communicate to confirm the pads are properly located and make necessary adjustments.

How to Rearrange the Bouldering Pads?

Spotters should rearrange the pads to achieve optimal placement, particularly on highballs or traverses, and be versatile about their standing positions.

As you change the pads, engage your boulderer so they are aware and you don’t finish at the landing site. 

Here is some professional advice.

  • Keep your setting clean-when you are shuffling pads, make sure the rest of your gear (backpacks, food, shoes) is neat, so the pads don’t get stuck on anything.
  • Drag the pads by their corners, ensuring the straps are tucked away or tightened down, as they can get caught on rocks and roots.
  • Avoid tossing pads around indiscriminately while the boulderer is ascending; instead, practice or visualize shifting the pads before they begin. Be careful about which pads are permanent and which are mobile.

If You Are Spotting, Prepare Your Body Spot

1. Body positioning

The conventional position of the body is a counterbalanced position, with one foot before the other and slightly bent knees. 

Because the climber’s force will shove you backward, your knees will take the brunt of the pressure.

Also, be aware of what is behind you (stumps, rocks) to keep your balance.

2. Hands

It’s recommended that your thumbs be inside in terms of hand positioning.

When your boulderer comes crashing down, you will not snap your fingers. 

In addition, keep your hands bent, in a modest hug-like position, in preparation for catching a fall.

Learn further about proper falling in our special article for falling techniques in bouldering.

You’ll often catch the climber around their center of gravity and direct them to the ground while protecting their head, spine, and neck.

3. Advanced spotting

Now that we have covered the basics let’s move on to some more advanced methods.

Techniques dependent on the situation:

What if the Boulderer is Much Bigger than You? 

The easiest method to decelerate someone larger than you or prevent a massive fall is to double-hand their butt. 

It’s preferable to get over the awkwardness of this technique than to injure your climber.

What if the Boulderer is Smaller than You?

If the boulderer is smaller than you, grab their waist as they descend to slow them down and gently set them on the pads.

You need a lot of practice and familiarity to pull this technique off.

What is the Takedown Method for Spotting?

You might be trying to keep your boulderer away from rocks or other items on the ground in some cases. 

You can try pushing the boulderer forward or sideways toward the pads from this position.

After you’ve steered the climber into the pads, go for the waist and butt-shove to decelerate the fall.

What is the Cave Snag when Spotting?

Climbers might come off in unexpected ways when dealing with overhanging difficulties.

Having your hands beneath your armpits instead of your hips ensures a perfect spot. 

The climber can fall on their legs or feet rather than toppling backward.

To give a sufficient spot, go underneath the boulderer, even if it involves kneeling uncomfortably.

Do a Group Catch

When there are several spotters, it’s critical to coordinate and ensure that everyone understands their responsibilities. 

It can be beneficial for one of the spotters to take leadership in large groups with many pads.

The rest of the spotters can monitor different landing zone positions while one person coordinates.

How to Spot when Doing Highballs?

During highball bouldering, the spotter must be ready to take a tremendous amount of energy when dealing with these significant difficulties.

You are not present to catch them but rather to soften the fall. 

Spotters are still helpful above 20 ft, but their mission will now be to provide psychological support and prevent the boulderer from significant injury-in other words, to make sure the boulderer falls upright. 

Spotters are present to offer an extra point of contact if the climber rolls or bounces from the pads after landing.

Spotters should also ensure that they’re far enough back to prevent the climber from falling behind them.

What Are the Power Spots when Bouldering?

Here the spotter lifts the climber’s weight to perform crux climbs and gain a feel for generating off holds they’re having difficulties with. 

Push on the rear of your boulderer’s hips to transfer their weight towards the rock and give a strong power spot. 

Communication is key, as an uninvited power spot may be an unpleasant experience for everyone concerned.

The push movement helps balance your muscles.

How to Avoid Injuries while Spotting?

A rolled or fractured ankle is the most common bouldering injury.

Head and neck injuries, on the other hand, can happen-and they can be fatal. 

Here are some suggestions:

  • The most important thing for you to do is maintain your climber erect and protect their head and neck. Keep this in mind at all times. 
  • Stay on them until they’ve topped out because you don’t know what could happen-the climber could shatter a hold, dry fire, or panic and bail.
  • After the climber has landed, keep a firm grip on them to prevent them from tumbling or bouncing into any risks. Jackets, pads, and other items can be used to cover stones and other dangers on the ground-be creative! 
  • Push your climber toward the pads if she falls headfirst into an obstacle, though it means they risk lower-body damage. When highballing, the climber should wear a helmet.

If you are advanced in bouldering, be sure to read our special article on bouldering tips to improve your boulder skills.

Do You Need a Spotter for Bouldering?

You can get help from a spotter if climbing outdoors.

Most experts do not recommend spotters for indoor climbing due to adequate padding by the gym.

What Is Effective Spotting in Climbing?

An effective spotter should not hinder the climber as he may have to couch uncomfortably to give space to the climber.

Most experts recommend that spotters keep their arms raised to tackle the effects of gravity.

How Do You Find a Climber on the Wall?

You can go to the gym in your local area and climb the walls.

Many others are climbing the wall at the same time.

You can introduce yourself to the climber.

It is one of the best ways to find climbers and spotters on the wall.

Are You Supposed to Start with Both Hands when Bouldering?

You can start the bouldering with both hands as there are no holds specific for the left or right hands.

It is easier to start the bouldering journey by practicing the start with both hands.

Similar Posts